Author Topic: Super Badass Tactical Rifle Thread (Read 1911 times)

ajc281509 · « **on:** June 12, 2010, 09:52:17 PM »

To complement BoiseShooter's new tactical gear thread here is the official Tactical Rifle thread....

ida83704 · « **Reply #1 on:** June 12, 2010, 10:42:14 PM »

what 'sound moderator' do you have on it?

ajc281509 · « **Reply #2 on:** June 12, 2010, 10:50:03 PM »

It is a Noveske KX3, it's just a "krink" style flash hider..

http://noveskerifleworks.com/cgi-bin/imcart/display.cgi?item_id=kx3556p&cat=11&page=1&search=&since=&status=

agunforeachhand · « **Reply #3 on:** June 12, 2010, 11:01:24 PM »

[attachment=1]

[attachment=2]

ajc281509 · « **Reply #4 on:** June 12, 2010, 11:07:48 PM »

looks good, give us the run down..parts, likes/dislikes?

agunforeachhand · « **Reply #5 on:** June 12, 2010, 11:11:21 PM »

oly arms plinker model. added knights arm shields , ergo pistol grip and the caa forearm grip. magpul mags.

I love it. It has not failed me yet. I also have a weaver scope I sometimes mount on it. Other then that it is all the tactical I need

TrooperBrian · « **Reply #6 on:** June 12, 2010, 11:12:08 PM »

Even though I posted it before:

technique · « **Reply #7 on:** June 13, 2010, 01:17:13 PM »

Super stipple, done by ajc281509

I then borrowed the stippler and stippled my AFG and MIAD....then every P-mag I own.

Build is as follows:

Lower
Noveske lower
RRA NM lower parts/ambi safety selector.
KNS anti walk pins
Magpul MIAD, M93B stock, BAD lever

Upper
LMT 14.7in barrel/BCG
PRI gas buster charging handle
Daniel Defense 12in FSP OmegaX rail
Magpul XTM panels, ladder covers, Angled fore grip
MaTech rear sight
Surefire X200 light
OPS Inc. silencer

Vtac sling

ManOnFire · « **Reply #8 on:** June 16, 2010, 12:45:12 PM »

almost done

Noveske lower
BCM upper
WOA 16" barrel
Midwest industries rail
Super sniper 10x and Young chrome BCG will finish it off down the road

ajc281509 · « **Reply #9 on:** June 16, 2010, 12:47:43 PM »

What rail system is that? ^^

TrooperBrian · « **Reply #10 on:** June 16, 2010, 03:17:54 PM »

Quote from: ajc281509 on June 16, 2010, 12:47:43 PM

What rail system is that? ^^

Read the caption.

I have the same one in midlength.

ajc281509 · « **Reply #11 on:** June 16, 2010, 11:47:48 PM »

SAOAFR! Thanks!

Joey · « **Reply #12 on:** June 17, 2010, 11:59:09 AM »

Quote from: ManOnFire on June 16, 2010, 12:45:12 PM

almost done

Noveske lower
BCM upper
WOA 16" barrel
Midwest industries rail
Super sniper 10x and Young chrome BCG will finish it off down the road

Is that a 7.62 can?

luvmy45 · « **Reply #13 on:** September 08, 2010, 07:46:55 PM »

Ok, I'll play... I just had a tactical rifle... till today, now I have acheived Badassness...

Savage 308, Choate USS Stock, SS 10x42 Mildot scope, and last but not least... Tac Sol Karma 7 Shusher w/tab gear Nomex sleeve that can stay in place while shooting and allows removal of the can when hot.

Rifle has shot 1/4 MOA groups, usually holds around 1/2 to 3/4 MOA, good out to 1275 yards.

berg · « **Reply #14 on:** September 08, 2010, 09:02:13 PM »

bery bery nice

popsgunner · « **Reply #15 on:** September 08, 2010, 09:27:14 PM »

BK.....

Mascampo · « **Reply #16 on:** September 21, 2010, 02:22:54 AM »

Here is my RRA 16" and Gen4 Glock 17 w/Viridian GLK.

technique · « **Reply #17 on:** November 01, 2010, 03:55:35 PM »

Not mine, but tactical for sure...

Nomad · « **Reply #18 on:** November 02, 2010, 08:18:42 AM »

Some great builds, nice looking units.........

mjmcmahon · « **Reply #19 on:** June 24, 2011, 04:06:21 PM »

Long overdue: pics of a few of my rifles:

POF P415 18" in 5.56:

CZ-527 .223:

Yours truly behind my pride and joy: Savage Model 10FCP-HS in .308:

ida83704 · « **Reply #20 on:** June 25, 2011, 04:00:58 PM »

MJM,
What twist is that on the .308?
Have you tried 190SMK, 208Amax or 210SMK's?

mjmcmahon · « **Reply #21 on:** June 25, 2011, 07:22:36 PM »

Ida -

the Savage 10FCP runs a 1:10 twist. I haven't tried any of the heavier bullets because I get these kinds of groups out of 175SMKs:

First round (high-left) was the clean & cold bore shot. The next 3 were in the single fuzzy hole, and I pulled the last one left by 1/2" That's a 4" round at 100 meters.

I might go thru and grab some of the heavier ones at some point...bulletsamples.com did me well for a range of bullets for my POF.

ida83704 · « **Reply #22 on:** June 25, 2011, 07:55:30 PM »

MJM,
Heavies may or may not be more accurate, but they will give you some additional supersonic range.
a 10 twist should spin a 208amax which should give about 250 yards more supersonic, plus better in the wind.

mjmcmahon · « **Reply #23 on:** June 26, 2011, 10:42:04 AM »

ida -

good information! My last practical precision match had us out to 1200+ yards and the 175SMK drops subsonic at around 1100. The hard part about shooting that at competition is that I don't know that I'd want to use the 208's all the way through and it'd take a bit of work to determine the dope for that round at 1100+. In addition, the last competition would have been difficult to plan loads for because it was a 'shooters choice' arrangement that could have had us shooting at practically any range at any time. Kinda hard to know what count to load up for when you have no idea what the round count for ultra-long range versus just long range will be.

I'll find some 208's or 210's and give 'em a try!