Author Topic: Anyone in Boise area loading for 9mm major?  (Read 426 times)

Offline avking

  • Trade Count: (7)
  • Hero Member
  • *****
  • Posts: 291
Anyone in Boise area loading for 9mm major?
« on: July 11, 2011, 05:57:32 PM »
I should have my new Predator Tactical Banshee soon and need to start loading for 9mm major. Is anyone local loading 9mm major? What primer, powder and bullet are you using? I load mostly 40 & 45 now and use Titegroup for both. I will probably try to use titegroup for 9mm major, but would like to know what some other local shooters are using.

Offline carharttfarmer

  • Trade Count: (15)
  • Hero Member
  • *****
  • Posts: 942
Re: Anyone in Boise area loading for 9mm major?
« Reply #1 on: July 11, 2011, 06:13:54 PM »
i have only done a little but on enos theres lots of good info and as far as using titegroup everything i have read says NOT to

my load is a 124gr bullet with 7grs of longshot with a cci small rifle primer

Offline avking

  • Trade Count: (7)
  • Hero Member
  • *****
  • Posts: 291
Re: Anyone in Boise area loading for 9mm major?
« Reply #2 on: July 11, 2011, 06:50:55 PM »
Could I buy or trade with you for 50 rounds of your 9mm major to see if it runs in my gun, before I order powder? I have read some threads on Enos and the problem with that much info is you can almost always find threads that contradict each other. I am hoping to find a few locals with different loads I could try out to find what my gun likes. Then only buy powder once.

Offline carharttfarmer

  • Trade Count: (15)
  • Hero Member
  • *****
  • Posts: 942
Re: Anyone in Boise area loading for 9mm major?
« Reply #3 on: July 11, 2011, 07:07:29 PM »
ya not a problem just let me know when your gun comes in and ill get ya some

Offline Jaggy13

  • Site Supporter
  • Trade Count: (5)
  • Hero Member
  • *****
  • Posts: 771
  • I love it when a plan comes together
Re: Anyone in Boise area loading for 9mm major?
« Reply #4 on: July 11, 2011, 08:19:29 PM »
Dean Barton shoots 9 major.
Is this for an open gun?
They call me "Double J"

Offline avking

  • Trade Count: (7)
  • Hero Member
  • *****
  • Posts: 291
Re: Anyone in Boise area loading for 9mm major?
« Reply #5 on: July 11, 2011, 08:41:00 PM »
Dean Barton shoots 9 major.
Is this for an open gun?

Yes, for my soon to be new open gun from Predator.

Offline Idaho_Gun_Nut

  • Site Supporter
  • Trade Count: (4)
  • Hero Member
  • *****
  • Posts: 810
Re: Anyone in Boise area loading for 9mm major?
« Reply #6 on: July 11, 2011, 09:47:09 PM »
When did they start allowing 9x19 major?  When I was in the game 9x21 was the minimum for making major.
Μολὼν Λαβέ
"They that can give up essential liberty to obtain a little safety deserve neither liberty nor safety" Benjamin Franklin

Offline tgibson

  • Trade Count: (6)
  • Hero Member
  • *****
  • Posts: 1456
Re: Anyone in Boise area loading for 9mm major?
« Reply #7 on: July 11, 2011, 11:11:57 PM »
I should have my new Predator Tactical Banshee soon and need to start loading for 9mm major. Is anyone local loading 9mm major? What primer, powder and bullet are you using? I load mostly 40 & 45 now and use Titegroup for both. I will probably try to use titegroup for 9mm major, but would like to know what some other local shooters are using.
I've got a load for 9major I'd give you if you wanted it. Yea...don't use titegroup.
Adios
TG
Some of my cool stuff
PWS Wraith w/Leupold MKIV and MGM Switchview, Bartons Custom STI with Schuemann barrel, Rem Vesamax with NC tube extention and Redneck Tactical rear slug site.

"The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants."
Thomas Jefferso

Offline avking

  • Trade Count: (7)
  • Hero Member
  • *****
  • Posts: 291
Re: Anyone in Boise area loading for 9mm major?
« Reply #8 on: July 12, 2011, 09:47:39 AM »
I've got a load for 9major I'd give you if you wanted it. Yea...don't use titegroup.
Adios
TG

Yes, please PM me the load when you can. Thanks.

Offline kaen3e

  • Trade Count: (5)
  • Full Member
  • ***
  • Posts: 94
Re: Anyone in Boise area loading for 9mm major?
« Reply #9 on: July 15, 2011, 09:30:52 PM »
sure  using pulldown mystery powde(5.0gr), 124gr pulled bullets and any small rifle primer.  1360fps out out sprinfeild xd with 21lb spring.  1380fps out of 8" uzi smg